Valve Clack in UG

http://www.cadfamily.com/HTML/Article/Valve%20Clack%20in%20UG_451.htm

1. Launch UG.

2. Click icon, select Model and input name “Valve Clack”.

3. Click icon, then select the ZC as the vector, and edit as shown in Figure 1, then click icon and edit as shown in Figure 2 to define the point, then click icon twice.

4. Click icon, and edit as shown in Figure 3, and click icon.

5. Click icon, and edit as shown in Figure 4, and click icon.

6. Click icon, and edit as shown in Figure 5, and click icon.

7. Click icon, select the red face as the planar placement face, and then edit as shown in Figure 6, then click icon.