Fan Blades in SolidWorks

 

Figure1

Step1: Select the workbench

1.Launch solidworks2009（or click the icon in the desktop）

2.Select Start>new >a 3d representation.of a singe desinge compoent

3.Save file .Rename PartBody “Fan blades”

Step2:Draw the bottom of Fan blades

1. Creat a new reference plane as shown in Figure2.The path : insert>reference geometry>plane.Set the workbenth “ plane",click theicon,creat a new sketch1 (or click the icon) with the centerline iron , three point arc icon and smart dimension icon.Look at Figure3.Don’t forget to quit the sketch workbench.

Figure2

Figure2

3. Set the workbenth “right plane",click theicon,creat a new sketch1 (or click the icon) with the centerline iron , tangent arc icon and smart dimension icon.Look at Figure4.Don’t forget to quit the sketch workbench.

Figure3

4. Creat a new reference plane as shown in Figure4.The path : insert>reference geometry>plane.Set the workbenth “ plane",click theicon,creat a new sketch3 (or click the icon) with the centerline iron , three point arc icon and smart dimension icon.Look at Figure5.Don’t forget to quit the sketch workbench.

Figure 4 Figure5

Figure 6 Figure7

5. Creat a new reference plane as shown in Figure8.The path : insert>reference geometry>plane.Set the workbenth “ plane",click theicon,creat a new sketch3 (or click the icon) with the centerline iron , three point arc icon and smart dimension icon.Look at Figure9.Don’t forget to quit the sketch workbench.

http://www.cadfamily.com/html/Article/Fan%20Blades%20in%20SolidWorks_516_1.htm

http://www.cadfamily.com/html/Article/Fan%20Blades%20in%20SolidWorks_516_2.htm

http://www.cadfamily.com/html/Article/Fan%20Blades%20in%20SolidWorks_516_3.htm

http://www.cadfamily.com/html/Article/Fan%20Blades%20in%20SolidWorks_516_4.htm