1. Launch UG.
2. Click icon, select Assembly and input name “Trim_pelucohi”, and then click
icon.
3. Click icon to close the Add Component dialog box.
4. Right-click in the blank area of the Assembly Navigator, and then choose WAVE Mode as shown in Figure 1.
Figure 1
5. Right-click over the name of Trim_pelucohi in the Assembly Navigator, then choose WAVE, and then choose Create New Level as shown in Figure 2. Then click the icon, then input “first” as the name, and then click
icon, and then click
icon.
Figure 2
6. Right-click over the name of first in the Assembly Navigator, then choose Make Work Part as shown in Figure 3.
Figure 3
7. C lick icon, and select Modeling as shown in Figure 4.
Figure 4
8. Click icon, then click
icon, and then click
icon to create a sketch as shown in Figure 5, then click
icon
Figure 5
Then select the ZC as the vector and edit as shown in Figure 6, and then click icon
Figure 6
9. Click icon, then select
in the type, then select the YC-ZC Plane as the object and edit as shown in Figure 7, then click
icon.
http://www.cadfamily.com/html/Article/First%20in%20UG_NX_528_1.htm
http://www.cadfamily.com/html/Article/First%20in%20UG_NX_528_2.htm
http://www.cadfamily.com/html/Article/First%20in%20UG_NX_528_3.htm
http://www.cadfamily.com/html/Article/First%20in%20UG_NX_528_4.htm
No comments:
Post a Comment