Dig Hand in PROE

http://www.cadfamily.com/HTML/Article/Dig%20Hand%20in%20PROE_446.htm
Step1. Create and name the model of part as INSTANCE_ DIG_HAND.PRT.

Step2. Create the solid extrusion feature shown as Fig.2, the relevant operations are shown as follows.

1 Click “insert”>“”.

2 Select the type of extrusion feature in the appeared control panel: click icon.

3 Define the placement property of sketch section.

(1) Click icon in the control panel

(2) Set sketch plane: select datum plane FRONT as sketch plane.

(3) Set view orientation of sketch: take default orientation of the yellow arrow in the model as view orientation.

(4) Specify referential sketch plane: select datum plane TOP as reference.

(5) Specify the orientation of referential sketch plane: select Top as the orientation of referential sketch plane.

(6) Complete the placement property of sketch section: click enter into sketch condition.

4 Create feature section: accept the default reference selection, and then draw the section as Fig.13 shown. Click button then quit sketch.

5 Select the type of depth and its depth: set as the type of the depth, and then enter 400mm in the textbox of depth.


6 Preview feature: click icon in the control panel to browse the created feature.

7 Finish feature: click icon to finish the extrusion.

Step3. Add cutting feature as Fig.4 shown, the relevant operations are shown as follows.