Fish in UG_NX

1. Launch UG.

2. Click icon, select Model and input name “Fish”.

3. Click icon, select the XC-ZC plane as the sketch plane as shown in Figure 1, then click icon to create a sketch as shown in Figure 2, then click icon.

Figure 1

 

Figure 2

4. Click icon and create the curve as shown in Figure 3. Then click icon.

Figure 3

5. Click icon and create the curve as shown in Figure 4. Then click icon.

Figure 4

6. Click icon, then select the yellow line as the first object, and then select the green line as the second object as shown in Figure 5, and then click icon.

Figure 5

7. Click icon, then select the green Section 1, and then click the icon in the Guide, then select the line of Guide 1 and then press the mouse middle key in the blank areas, then select the yellow curve as the Guide 2 as shown in Figure 6, then click icon.

Figure 6

8. Click icon, select the XC-ZC plane as the sketch plane as shown in Figure 7, then click icon to create a sketch as shown in Figure 8, then click icon.

http://www.cadfamily.com/html/Article/Fish%20in%20UG_NX_524_1.htm