Fourth in UG_NX

1. Right-click over the name of Third in the Assembly Navigator, then choose WAVE, and then choose Create New Level as shown in Figure 1. Then click the icon, then input “Fourth” as the name, and then click icon, and then click icon.

Figure 1

2. Right-click over the name of Fourth in the Assembly Navigator, then choose Make Display Part as shown in Figure 2.

Figure 2

3. Click icon, then select the yellow parts as the objects to hide as shown in Figure 3, then click icon.

Figure 3

4. Click icon, then select the green block as the target body to trim, and then press the mouse middle key in the blank areas, then select the yellow face as the tool face as shown in Figure 4, and then click icon.

Figure 4

5. Click icon, then select the yellow parts as the objects to hide as shown in Figure 5, then click icon.

http://www.cadfamily.com/html/Article/Fourth%20in%20UG_NX_512_1.htm

http://www.cadfamily.com/html/Article/Fourth%20in%20UG_NX_512_2.htm

http://www.cadfamily.com/html/Article/Fourth%20in%20UG_NX_512_3.htm