1.Launch PRO-E
2.Click 
icon, select part 
and input name “upper_housing”.
3.Click
icon, select the sketch plane FRONT then select OK to create a sketch as shown in Figure 1 ,then click the 
.
4.Select the sketch as shown in figure 1 then click 
icon and select extrude as solid then enter a depth of the extrude.the extrude1 as shown in Figure 2.
5.Click 
icon ,then select the protrusion icon under the sweep icon.select the sketch trajectory ,select the placement FRONT,select the OK and default ,then sketch the trajectory ,then click the process and the trajectory are shown in the Figure 3 and Figure 4.
6.Then sketch the section of the sweep,then click the ,the section as shown in Figure 5
http://www.cadfamily.com/html/Article/UPPER_Housing%20in%20PROE_513_1.htm
http://www.cadfamily.com/html/Article/UPPER_Housing%20in%20PROE_513_2.htm
http://www.cadfamily.com/html/Article/UPPER_Housing%20in%20PROE_513_3.htm
No comments:
Post a Comment