1. Launch UG.
2. Click icon, select Model and input name “Mechanical Arm”.
3. Click icon and then click the
icon to input the origin as show in Figure 1, then click
icon, and edit as shown in Figure 2. Click
icon.
Figure 1 Figure 1
4. Click icon, then click
icon, then click the yellow face as the planar placement face and select the red curve as the horizontal reference as shown in Figure 3, then edit as shown in Figure 4, then click
icon,
Figure 3 Figure 6
Figure 4
Then click icon, select the yellow edge as the target edge and select the red curve as the tool edge as shown in Figure 5, then edit as shown in Figure 6, and then click
icon.
Figure 5 Figure 7
Then click icon, select the yellow edge as the target edge and select the red curve as the tool edge as shown in Figure 7, then edit as shown in Figure 6, and then click
icon twice
5. Click icon, then click
icon, and then select the red face as placement face then select ZC as the horizontal reference as shown in Figure 8, then edit as shown in Figure 9, then click
icon.
http://www.cadfamily.com/html/Article/Mechanical%20Arm%20in%20UG_NX_519_1.htm
http://www.cadfamily.com/html/Article/Mechanical%20Arm%20in%20UG_NX_519_2.htm
http://www.cadfamily.com/html/Article/Mechanical%20Arm%20in%20UG_NX_519_3.htm
No comments:
Post a Comment