1. Launch UG.
2. Click icon, select Model and input name “Foundation”.
3. Click icon and then click
icon to input the origin as show in Figure 1, then click
icon. Then edit as shown in Figure 2 and click
icon.
Figure 1 Figure 2
4. Click icon, then select the ZC as the vector, and edit as shown in Figure 3, then click
icon and edit as shown in Figure 4 to define the point, then click
icon twice.
Figure 3 Figure 4
5. Click icon, and edit as shown in Figure 5, and click
icon.
Figure 5
6. Click icon, and edit as shown in Figure 6, and click
icon.
Figure 6
7. Click icon, and edit as shown in Figure 7, and click
icon.
http://www.cadfamily.com/html/Article/Foundation%20Modeling%20in%20UG_NX_558_1.htm
http://www.cadfamily.com/html/Article/Foundation%20Modeling%20in%20UG_NX_558_2.htm
http://www.cadfamily.com/html/Article/Foundation%20Modeling%20in%20UG_NX_558_3.htm
No comments:
Post a Comment