Bent axle in PROE

http://www.cadfamily.com/HTML/Article/Bent%20axle%20in%20PROE_488.htm
Step1. Create and name the model of part as INSTANCE_ SHAFT1.PRT.
Step2. Create the axis A_1 shown as Figure 2, the relevant operations are shown as follows.

Clickicon in toolbars> Select datum plane FRONT ,and press Ctrl key to select datum plane TOP> Click .The “DATUM AXIS” dialog box is shown in figure3.
Step3. Create the solid extrusion feature shown as Figure 4, the relevant operations are shown as follows.
1 Click “insert”>“”.
2 Select the type of extrusion feature in the appeared control panel: click icon.
3 Define the placement property of sketch section.
(1) Click >icon in the control panel
(2) Set sketch plane: select datum plane RIGHT as sketch plane.
(3) Set view orientation of sketch: take default orientation of the yellow arrow in the model as view orientation.
(4) Specify referential sketch plane: select datum plane TOP as reference.
(5) Specify the orientation of referential sketch plane: select Top as the orientation of referential sketch plane.
(6) Complete the placement property of sketch section: click enter into sketch condition.
4 Create feature section: accept the default reference selection, and then draw the section as Figure 5 shown. Click button then quit sketch.
5 Select the type of depth and its depth: the type of the depth is set, and then enter 220mm in the textbox of depth.
6 Preview feature: click icon in the control panel to browse the created feature.
7 Finish feature: click icon to finish the extrusion.
Step4. Create datum plane DTM1 shown as figure 6 shown, the relevant operations are shown as follows.
Click icon> Select datum plane RIGHT as reference, and “Offset” is set> Type 60 mm in “Translation” textbox shown as figure 7> Click .
Step5. Create the solid extrusion feature shown as Figure 8, the relevant operations are shown as follows.
1 Click “insert”>“”.
2 Select the type of extrusion feature in the appeared control panel: click icon.
3 Define the placement property of sketch section.
(1) Click > icon in the control panel
(2) Set sketch plane: select datum plane DTM1 as sketch plane.
(3) Set view orientation of sketch: take default orientation of the yellow arrow in the model as view orientation.
(4) Specify referential sketch plane: select datum plane TOP as reference.
(5) Specify the orientation of referential sketch plane: select Top as the orientation of referential sketch plane.
(6) Complete the placement property of sketch section: click enter into sketch condition.
4 Create feature section: accept the default reference selection, and then draw the section as Figure 9 shown. Click button then quit sketch.