Cover in PROE

http://www.cadfamily.com/HTML/Article/Cover%20in%20PROE_449.htm
Step1. Create and name the model of part as INSTANCE_PART_COVER.PRT.

Step2. Create the solid rotation feature shown as Figure 2, the relevant operations are shown as follows.

1 Click “insert”>“”.

2 Select the type of extrusion feature in the appeared control panel: click icon.

3 Define the placement property of sketch section.

(1) Click> icon in the control panel

(2) Set sketch plane: select datum plane FRONT as sketch plane.

(3) Set view orientation of sketch: take default orientation of the yellow arrow in the model as view orientation.

(4) Specify referential sketch plane: select datum plane TOP as reference.

(5) Specify the orientation of referential sketch plane: select Top as the orientation of referential sketch plane.

(6) Complete the placement property of sketch section: click button in the window of defining the placement property of sketch section.

4 Create feature section: accept the default reference selection, and then draw the section as Figure 3 shown(don’t forget to draw center line). Click button then quit sketch.

5 Define revolving angle: select the type of revolving angle in the control panel, , then enter 360 in the textbox of angel , and press the Enter key.

6 Preview feature: click icon in the control panel to browse the created feature.

7 Finish feature: click icon to finish the rotation.

Step3. Create the solid extrusion feature shown as Figure 4, the relevant operations are shown as follows.