CADFamily.com: Pump Cylinder in UG

5/10/2011

Pump Cylinder in UG_NX

1. Launch UG.

2. Click icon, then select Model and input name “Pump Cylinder”.

3. Click icon and edit as shown in Figure1, then click icon edit as shown in Figure2.

Figure 1 Figure 2

Then click icon twice and create the body as shown in Figure 3.

Figure 3

4. Click icon, then edit it and select four edges as shown in Figure 4, then click

Figure 4

5. Click icon, edit as shown in Figure 5, then select the top face as planar face to sketch as shown in Figure 6 and then click icon.

Figure 5 Figure 6

6. Click icon, edit as shown in Figure 7, then select the top face as planar face to sketch as shown in Figure 8 and then click icon.

Figure 7 Figure 8

7. Click icon to create a datum plane as shown in Figure 9 and then click icon.

Figure 9

8. Click icon, then select Simple Hole (5) as feature and select Datum Plane (6) as mirror plane, then click icon as show in Figure 10.

Figure 10

9. Click icon, select Rectangular, then select the side face as the planar placement face and select the longer edge as the horizontal reference, then edit as shown in Figure 11 to create the body as shown in Figure 12.

Figure 11

Figure 12

10. Click icon, select the top face as the sketch plane to create a sketch as shown in Figure13, then click icon and click icon, then select the sketch to hide it.