Pumping unit in UG_NX

http://www.cadfamily.com/HTML/Article/Pumping%20unit%20in%20UG_NX_486.htm
1. Launch UG.
2. Click icon, select Model and input name “Pumping unit”.
3. Click icon and then click icon to input the origin as show in Figure 1, then click icon. Then edit as shown in Figure 2 and click icon.

4. Click icon, and then click icon to input the origin as show in Figure 1, then click icon. Then edit as shown in Figure 3 and click icon.

5. Click icon, then select the block as the target body to trim, then edit as shown in Figure 4, and then click icon, then edit as shown in Figure 5, then select the three points as shown in Figure 5 and click icon twice.

6. Click icon, then select the ZC as the vector, and edit as shown in Figure 6, then click icon and edit as shown in Figure 7, then click icon twice.