Gambit -- BASIC TURBO MODEL WITH UNSTRUCTURED MESH

http://www.cadfamily.com/a/CAE_FEA_CFD/Gambit/Gambit----BASIC-TURBO-MODEL-WITH-UNSTRUCTURED-MESH_7028.html

In general, the GAMBIT turbo modeling procedure includes seven basic steps:

Creating or importing edge data that describes the turbo profile

Creating the turbo profile

Creating the turbo volume

Assigning zone types to regions of the turbo volume

Decomposing the turbo volume

Meshing the turbo volume

Viewing the turbo volume

This tutorial illustrates six of the seven steps listed above. The tutorial excludes the turbo

decomposition step, because the turbo volume is to be meshed using unstructured hexahedral mesh elements. Turbo volume decomposition is primarily used to facilitate the creation of structured meshes (see Tutorial 9 in this guide).

NOTE: In this tutorial, the turbo-volume viewing operation (Step 7, above) is illustrated

in conjunction with the mesh examination step (see “Step 11:Examine the Mesh,” below).

8.4 Procedure