2D_Lab11_HeatTrensfer

http://www.cadfamily.com/a/CAE_FEA_CFD/Forge-CAST/2D-Lab11-HeatTrensfer_4061.html

The DEFORM-2D MAIN window should already be open. With the HeatTransfer.DB file
highlighted in the file list, click to open the Pre-processor. The program will ask
which database step to open - select Step 240 and click . Step 240 will be loaded
into the Pre-processor.
At Step 240 in the furnace heat up simulation, the billet had come to a uniform temperature of ~
1800°F. Users can verify that the billet still has that temperature by looking in the
section and seeing that the Temperature is no longer 68°F but is listed as 1799.99. This is the
temperature that all nodes in the billet have. The temperature distribution can also be viewed by
clicking the button and then the button. On the Thermal tab, the Plot
Variable icon next to NodeTemperature is used to view the billet's temperature distribution.