Gambit -- USING THIS TUTORIAL GUIDE

http://www.cadfamily.com/a/CAE_FEA_CFD/Gambit/Gambit----USING-THIS-TUTORIAL-GUIDE_7019.html

If you are new to GAMBIT, you should first work through Tutorial 1 in order to familiarize yourself with the GAMBIT graphical user interface (GUI) and with basic geometry

creation and meshing procedures. You may then want to try a tutorial that demonstrates

features that you are going to use in your application. For example, if you are planning to

start from an existing geometry that requires some cleanup, you should look at Tutorial 5.

Each tutorial demonstrates different GAMBIT features, so it is recommended that you do

each tutorial in order to get the full benefit from this Tutorial Guide.

Note that Step 1 in Tutorials 2 through 6 requires you to select the solver to be used for

the CFD calculation. In many cases, you could select a different solver than the one used

in the tutorial. The solver selection is included in the tutorials to demonstrate the process

of selecting a solver. It also illustrates that the choice of solver dictates the options available in various forms (for example, the boundary types available in the Specify Boundary

Types form).