Shape_Rolling_Template_Lab_Lagrangian

http://www.cadfamily.com/a/CAE_FEA_CFD/Forge-CAST/Shape-Rolling-Template-Lab-Lagrangian_4155.html

1.1. Creating a New Problem
On a Unix machine, type DEFORM3 to open DEFORM™-3D. On a Windows machine, go to
the button an select DEFORM-3D from the menu. The DEFORM-3D MAIN window will
appear. Make a new problem under “Problem” directory. The problem setup window will open
as shown in figure 1.
Select the shape rolling guiding template as seen below and click .
Select under problem home directory, name the simulation SHAPE_ROLL_Lab1 ( See Figure
2) and click Finish.
1.2. Layout of Shape rolling template
The layout of the interface can be seen in the Figure 3 below. The screen is distributed into four
discrete sections. The display window is where the objects for the current operation can be
viewed. The project list window is where the list of settings currently editable. Based on the
selection in the project list window, certain values can be edited in the setting modification
window. As information is provided to the interface, information will be printed in the project
record window such as saved steps.