4/19/2015

DEFORM_2D_Lab_11_HeatTransferRestart

http://www.cadfamily.com/a/CAE_FEA_CFD/Forge-CAST/DEFORM-2D-Lab-11-HeatTransferRestart_4104.html

11.1.  Opening a Previous Simulation
The DEFORM-2D MAIN window should already be open. With the HeatTransfer.DB
file highlighted in the file list, click  to open the Pre-processor. The program
will ask which database step to open - select Step 240 and click . Step 240
will be loaded into the Pre-processor  At Step 240 in the furnace heat up simulation, the billet had come to a uniform
temperature of ~ 1800°F. Users can verify that the billet still has that temperature by
looking in the  section and seeing that the Temperature is no longer 68°F but is
listed as 1799.99. This is the temperature that all nodes in the billet have. The
temperature distribution can also be viewed by clicking the  button and then the
 button. On the Thermal tab, the Plot Variable  icon next to Node
Temperature is used to view the billet's temperature distribution.

No comments: