http://www.cadfamily.com/a/CAE_FEA_CFD/Forge-CAST/DEFORM-2D-Lab-01-GeometryManipulation_4098.html
1.1. Creating a New Problem
On a UNIX/ LINUX machine, type DEFORM2 to open DEFORM™-2D. On a Windows
machine, go to the button and select DEFORM-V10, and select DEFORM_2D
from the menu. The DEFORM-2D MAIN window will appear, ass shown below.
(See Figure 1.1)
Create a new problem by either selecting File ® New Problem or by clicking the New
Problem icon. The PROBLEM SETUP window will appear. Accept the default
setting and click for opening a new problem using the DEFORM-2D Pre
Processor. (See Figure 1.2)
1.2. Setting Simulation Controls
Click on the icon to open the SIMULATION CONTROL window. Change the
Simulation Title to Mesh. Make sure that the Units are set to English, and Deformation
option is activated (has a checkmark next to it), and Geometry is set to Axisymmetric.
Click the button when finished.
No comments:
Post a Comment