DEFORM_3D_lab

http://www.cadfamily.com/a/CAE_FEA_CFD/Forge-CAST/DEFORM-3D-lab_4137.html

Accept the default problem type (Figure 1.1) and home directory (Press "Next" twice)
When the Problem Setup page appears, specify the project name, "Stub_Shaft." Click the
"Finish" button to set up the problem in the pre-processor.
Object creation:
The Workpiece is automatically selected.
Click on the “Geometry”  tab. Then click on “Geo Primitive” to define a
primitive geometry. Once you are in the Geometry Primitive window, click on Cylinder
and enter the following values. Diameter = 0.8 and Height = 2.7. Click on “Create” then
“Close.”