Selecting One Contour (2-Axis Machining)
1. Select curves that define the lower contour of the part, or select the Sel
upper contour option from the main menu. Then select curves that
define the upper contour of the part. If you select multiple curves to
define upper or lower contours, the curves will be checked when you
execute machining to make sure they still imply single curves. If not, an
error message will be displayed.
2. Enter a value in the Part thickness readout (page 2 of WIRE EDM
PARAMETERS). The value is applied above or below the contour when
machining begins. It tells the machine tool how far apart to position the
wire guides.
No comments:
Post a Comment