LS1 Training Exercises (Step by Step)

http://www.cadfamily.com/a/CAM_CNC_DNC/LANTEK/LS1-Training-Exercises--Step-by-Step-_3291.html

Step 1. Start New Drawing.
Using the File Pull-Down Menu , Select New then select Part Drawing from Sub-menu,
which will then open the Part Properties Dialogue, select OK to continue.
Step 2. Drawing the Part Perimeter.
Using the Corner Rectangle  command, type “0” in the X & Y input boxes for the
rectangle start point. Next, type in the Width and Height input boxes and hit [Enter].
You should now have a rectangle on the screen.
Step 3. Corner Step.
Using the Corner Step  command, Type 2.084 in the Distance 1 box and 8.034 in
the Distance 2 box as show below
Using the corner step values click in the top right and left corners staying closest to the
vertical edge as shown below in figure 1.2
Figu
Step 4. Chamfer Lines
Select the Chamfer  command. Type in the values below.
With these values in place click in the new top right and left corners in order to create the
chamfers show below in figure 1.3.