11/07/2014

Delmia Tutorial-Creating Tags in a Group

Scope:

This procedure describes how to create tags.  Tags are created within previously created tag groups.  Individual tags or tag groups can then be assigned to robot sequences.
There is three ways to create the tags.
Creating tags that are snapped to the geometry
Creating tags that are located at the 0,0,0 coordinate
Creating tags at the local origin of a product

Procedure:

In this exercise, we will use the function Creating Tags that will be snapped to the geometry.
1.  With the new Tag Group created, select the New Tag Icon. 

2.  Select the newly created Tag Group, Ped Welder. The Define Plane dialog box appears. Select the Define Plane icon, if not already selected. Place 2 welds as shown.

Get free full Tutorial!
Please send me email:
cadxneter@hotmail.com

No comments: