11/06/2014

Delmia Tutorial-Clash Analysis

Procedure:

This procedure explains how to use the clash detection to determine in any clashes exist in our project. The collision or clash checked is between the weld gun and robot, and the tooling and the geometry.

1.  Select the Icon Clash from the Simulation Analysis Tools toolbar.

2.  The Check Clash Dialog box appears.  For the name, leave as interference.1.  For the Type, we will do a Contact + Clash, and Between two selections.

    
3.  For the Selections, Selection.1 is activated, so select the Weld Gun 2, and the Robot S-420iS. Select these from the PPR tree, that way all of the components making up the resource will be selected.  As they are selected, they highlight.



4.  Click in the Section2 window (activated it is blue), and select the RH Body Side Assembly (1), and the Station.1.
Get free full Tutorial!
Please send me email:
cadxneter@hotmail.com

No comments: