•In this chapter, performing free vibration
analyses in Simulation will be covered.
In Simulation, performing a free vibration analysis is similar to a
linear static analysis.
–It is assumed
that the user has already covered Chapter 4 Linear
Static Structural Analysis prior to this section.
•The following will be covered:
–Free
Vibration Analysis Procedure
–Free
Vibration with Pre-Stress Analysis Procedure
•The capabilities described in this section
are generally applicable to ANSYS DesignSpace Entra licenses
and above.
•For a free vibration analysis, the natural
circular frequencies wi and mode shapes fi are
calculated from:
•Assumptions:
–[K] and [M]
are constant:
•Linear elastic material behavior is assumed
•Small deflection theory is used, and no nonlinearities
included
•[C] is not present, so damping is not
included
•{F} is not present, so no excitation of the
structure is assumed
•The structure can be constrained or
unconstrained
Mode shapes {f} are relative values, not absolute
•The free vibration analysis procedure is
very similar to performing a linear static analysis, so not all steps will be
covered in detail. The steps in blue
italics are specific to free vibration analyses.
–Attach
Geometry
–Assign
Material Properties
–Define
Contact Regions (if applicable)
–Define Mesh
Controls (optional)
–Define
Analysis Type
–Include
Supports (if applicable)
–Request
Frequency Finder Results
–Set
Frequency Finder Options
–Solve the
Model
–Review
Results
Get free full Tutorial!
Please send me email:
cadxneter@hotmail.com
No comments:
Post a Comment