Pedestal in UG_NX

 

1. Launch UG.

2. Click icon, select Model and input name “Pedestal”.

3. Click icon, then click icon to create a sketch as shown in Figure1, then click icon.

Figure1

4. Click icon, select sketch (1) as the curve to extrude, and edit as shown in Figure 2, then click icon.

Figure 2

5. Click icon, then select the ZC as the vector, and edit as shown in Figure 3, then click icon and edit as shown in Figure 4 to define the point, then click icon twice.

Figure 3

Figure 4 Figure 5

6. Click icon, then click icon to create a sketch as shown in Figure5, then click icon.

7. Click icon, then click icon, then select the bottom face as placement face, then click icon and select curves created last step as placement outline curves, then click icon and edit as shown in Figure 6, then click icon and select the only body as the target body, then click icon and edit as shown in Figure 7, then click icon.

http://www.cadfamily.com/html/Article/Pedestal%20in%20UG_NX_502_1.htm