Step1. Create and name the model of part as flange as follow.
And chose template “mmns_part_solid”as the mode And click “ok”
Step2. Create the solid revolve feature shown the relevant operations are shown as follows
1、 Click 
icon
2、Define the placement of sketch section.
(1) Click 
>
icon in the control panel
(2) Set sketch plane: select datum plane FRONT as sketch plane.
(3) Set view orientation of sketch: take default orientation of the yellow arrow in the model as view orientation.
(4) Specify referential sketch plane: select datum plane RIGHT as reference.
(5) Specify the orientation of referential sketch plane: select Right as the orientation of referential sketch plane.
3、Complete the placement property of sketch section: click
button in the window of defining the placement property of sketch section.
4、Finish the section sketch： click 
icon to finish the section sketch and Specify the property as follow：
5、Preview feature: click 
icon in the control panel to browse the created feature.
6、Finish feature: click icon to finish the revolve
Step3 Create the draft feature as follow
1、Click 
2、Select the draft surfaces: select the side of the extrude feature as shown in the follow
http://www.cadfamily.com/html/Article/Flange(Active)%20in%20PROE_497_1.htm
http://www.cadfamily.com/html/Article/Flange(Active)%20in%20PROE_497_2.htm
http://www.cadfamily.com/html/Article/Flange(Active)%20in%20PROE_497_3.htm
No comments:
Post a Comment