Cap in PROE

http://www.cadfamily.com/HTML/Article/Cap%20in%20PROE_479.htm
Step1. Create and name the model of part as INSTANCE_ UPPER_CAP.PRT.

Step2. Create the solid extrusion feature shown as Fig.2, the relevant operations are shown as follows.

1 Click “insert”>“”.

2 Select the type of extrusion feature in the appeared control panel: click icon.

3 Define the placement property of sketch section.

(1) Click > icon in the control panel

(2) Set sketch plane: select datum plane RIGHT as sketch plane.

(3) Specify referential sketch plane: select datum plane TOPas reference.

(4) Specify the orientation of referential sketch plane: select Left as the orientation of referential sketch plane.

(5) Complete the placement property of sketch section: click button in the window of defining the placement property of sketch section.

4 Create feature section: draw the section as Fig.3 shown. Click button then quit sketch.

5 Select the type of depth and its depth: in control panel, set as the type of the depth, type 75mm in “Depth” textbox.

6 Preview feature: click icon in the control panel to browse the created feature.

7 Finish feature: click icon to finish the extrusion.

Step3. Create the draft feature shown as Fig.4, the relevant operations are shown as follows.