Fan_Blade in PROE

1. Launch PROE.

2.Click icon, select part and input name “fan_blade”.

3.Clickicon, select the sketch plane FRONT this process as shown in figure 1 then select OK to create a sketch as shown in Figure 2 ,then click the .

Figure 1

Figure 2

4.Select the sketch as shown in figure 2 ,then click the icon and select the axis .resolve the sketch ,at the same time ,enter the resolve angle and click the icon.this process as shown in figure 3 and figure 4 .

Figure 3

Figure 4

5.Click the icon ,then select the sketch plane ,this process as shown in figure 5.

Figure 5

6.create a sketch to resolved ,this sketch as shown in figure 6.

Figure 6

7.Select the sketch as shown in figure 6 ,then click the icon and select the axis .resolve the sketch ,at the same time ,enter the resolve angle and click the icon.this process as shown in figure 7 and figure8.

Figure 7

Figure 8

8.select the quilt as shown in figure 8,then click the icon ,then select the plane and click the icon .then the quilt was copied .this process as shown in figure 9 and figure 10 .

Figure 8

Figure 9

9.Clickicon, select the sketch plane FRONT this process as shown in figure 10 then select OK to create a sketch as shown in Figure11 ,then click the .

Figure 10

Figure 11

10.Select the sketch as shown in figure 11,then click the icon and select the axis .resolve the sketch ,at the same time ,enter the resolve angle and click the icon.this process as shown in figure12 and figure 13 .

Figure 12

Figure 13

11.Clickicon, select the sketch plane FRONT this process as shown in figure 14 then select OK to create a sketch as shown in Figure15 ,then click the .

http://www.cadfamily.com/html/PROE/Fan_Blade%20in%20PROE_514_1.htm

http://www.cadfamily.com/html/PROE/Fan_Blade%20in%20PROE_514_2.htm

http://www.cadfamily.com/html/PROE/Fan_Blade%20in%20PROE_514_3.htm