Design Cellphone Panel with ProE Part-B

Figure 67

39.Select the sketch as shown in figure 1 then click icon and select extrude as solid then enter a depth of the extrude.the extrude1 as shown in Figure 68 and figure 69.

Figure 68

Figure 69

40. Click the icon ,this icon in the edit in the main window ,this process as shown in figure 70.

Figure 70

41. Clickicon, select the sketch plane dtm2 this process as shown in figure 71 then select OK to create a sketch as shown in Figure 72 ,then click the .

Figure 71

Figure 72

42. Select the sketch as shown in figure 72 then click icon and select extrude as solid then enter a depth of the extrude.the extrude1 as shown in Figure 73 and figure 74.

Figure 73

Figure 74

43. Click the icon ,then select the plane to create a new dtm .this process as shown in figure 75 and figure 76.

Figure 75

Figure 76

44. click the icon in the main window ,this icon can do the draft of the plane ,this process as shown in figure 77 and figure 78

Figure 77

Figure 78

45. click the icon ,then do the shell as shown figure 78, and this process as shown in figure 79 and figure 80

Figure 79

Figure 80

46. click the icon in the main window,then select the plane and copy the plane ,this process as shown in figure 81

Figure 81

47. click the icon in the edit ,and do the offset of the plane ,this process as shown in figure 82

Figure 82

48.Clickicon, select the sketch plane FRONT this process as shown in figure 83 then select OK to create a sketch as shown in Figure 84 ,then click the .

Figure 84

Figure 85

49. Select the sketch as shown in figure 85 then click icon and select extrude as solid then enter a depth of the extrude.the extrude1 as shown in Figure 86 and figure 87.

http://www.cadfamily.com/html/Article/Design%20Cellphone%20Panel%20with%20ProE%20Part-B_563_1.htm

http://www.cadfamily.com/html/Article/Design%20Cellphone%20Panel%20with%20ProE%20Part-B_563_2.htm

http://www.cadfamily.com/html/Article/Design%20Cellphone%20Panel%20with%20ProE%20Part-B_563_3.htm