Disk-Shaped Gear in PROE

http://www.cadfamily.com/HTML/Article/Disk-Shaped%20Gear%20in%20PROE_441.htm
Step1. Create and name the model of part as INSTANCE_GEAR_PAN.PRT.

Step2. Create the solid extrusion feature shown as Fig.2, the relevant operations are shown as follows.

1 Click “insert”>“”.

2 Select the type of extrusion feature in the appeared control panel: click icon.

3 Define the placement property of sketch section.

(1) Click > icon in the control panel

(2) Set sketch plane: select datum plane FRONT as sketch plane.

(3) Set view orientation of sketch: take default orientation of the yellow arrow in the model as view orientation.

(4) Specify referential sketch plane: select datum plane RIGHT as reference.

(5) Specify the orientation of referential sketch plane: select Right as the orientation of referential sketch plane.

(6) Complete the placement property of sketch section: click button in the window of defining the placement property of sketch section.

4 Create feature section: draw the section as Fig.3 shown. Click button then quit sketch.

5 Select the type of depth and its depth: set as the type of the depth, and then enter 2.5mm in the “Depth” textbox.

6 Preview feature: click icon in the control panel to browse the created feature.

7 Finish feature: click icon to finish the extrusion