Sonnet Supplemental Tutorials

http://www.cadfamily.com/a/EDA_PCB/Altera/Sonnet-Supplemental-Tutorials_10105.html

This manual is intended to provide you with supplemental tutorials on important

features in the analysis engine and on how to use other Sonnet modules. There are

presently five tutorials. The first tutorial, in Chapter 2, teaches you how to add

parameters to a circuit and perform a parameter sweep and an optimization. The

second tutorial, in Chapter 3, shows you how to use circuit subdivision to obtain

accurate answers for very large circuits. The third tutorial shows a simple example

using Conformal Meshing. The fourth tutorial teaches you how to use both the

DXF and GDSII translators since the translators are very similar in operation. This

is followed by a tutorial on the Agilent Interface. The last tutorial teaches you how

to use the far field viewer to observe radiation patterns.

These tutorials assume you are familiar with Sonnet programs and their functions

and are capable of running a simple analysis. If you are a new Sonnet user, we

suggest you start with the Sonnet Tutorial manual included in your

documentation. These tutorials will teach you the basics of Sonnet.