Stage 4: Create a probed line
1. Turn the model around (see page 8) to display its back face.
2. In the Element toolbar, click the Probed Line button and
double-click near each end of the back face to define the line:
As before, the details of the line are displayed in the Features tab.
3. Change the probing strategy from UserDefined to
AutoTouchTrigger: to specify that you want PowerINSPECT OMV
to automatically define the probe path for the line:
The AutoTouchTrigger strategy creates six probe points and spaces
them equally along the line you created. To change the number of
probe points created for a line by default, click to display the
Parameters dialog, then select the Points row and click the spin
buttons to change the value to 4.
No comments:
Post a Comment