CimCore PowerINSPECT Scanning User Guide

http://www.cadfamily.com/a/CAM_CNC_DNC/Alphacam/CimCore-PowerINSPECT-Scanning-User-Guide_10019.html

3. In the Live view window, ensure that there is a valid frame on the

calibration sphere, and then click the Record >> button to capture

the frame in the Recorded frames window.

4. Repeat the previous step until you have captured at least sixteen

frames around the entire calibration sphere. You can use the <<

and >> buttons to navigate through the frames, or type the number

of the recorded frame in the box to the left of these buttons, and

then click the Go button to view the frame. You can also use the

Delete button to remove the frame currently shown in the

Recorded frames window.

5. Type the diameter (in mm) of the calibration sphere, in the Sphere

Radius box.

6. Click the Set Initial Matrix button to display the Math Matrix