http://www.cadfamily.com/HTML/Article/Fan%20Blades%20Modeling%20in%20SolidWorks_477.htm
Step1: Select the workbench
1.Launch solidworks2009（or click the icon in the desktop）
2.Select Start>new >a 3d representation.of a singe desinge compoent
3.Save file .Rename PartBody “Fan blades”
Step2:Draw the bottom of Fan blades
1. Creat a new reference plane as shown in Figure2.The path : insert>reference geometry>plane.Set the workbenth “ plane",click theicon,creat a new sketch1 (or click the icon) with the centerline iron , three point arc icon and smart dimension icon.Look at Figure3.Don’t forget to quit the sketch workbench.
3. Set the workbenth “right plane",click theicon,creat a new sketch1 (or click the icon) with the centerline iron , tangent arc icon and smart dimension icon.Look at Figure4.Don’t forget to quit the sketch workbench.
4. Creat a new reference plane as shown in Figure4.The path : insert>reference geometry>plane.Set the workbenth “ plane",click theicon,creat a new sketch3 (or click the icon) with the centerline iron , three point arc icon and smart dimension icon.Look at Figure5.Don’t forget to quit the sketch workbench.
5. Creat a new reference plane as shown in Figure8.The path : insert>reference geometry>plane.Set the workbenth “ plane",click theicon,creat a new sketch3 (or click the icon) with the centerline iron , three point arc icon and smart dimension icon.Look at Figure9.Don’t forget to quit the sketch workbench.
5/04/2011
Shaft Modeling in UGS_NX
http://www.cadfamily.com/HTML/Article/Shaft%20Modeling%20in%20UGS_NX_476.htm
http://www.cadfamily.com/HTML/Article/Shaft%20Modeling%20in%20UGS_NX_476.htm
1. Launch UG.
2. Click icon, select Model and input name “Shaft”.
3. Click icon, then click icon to create a sketch as shown in Figure1, then click icon.
4. Click icon, select sketch (1) to revolve, then select XC as the vector, then select the yellow point as the point and edit as shown in Figure 2. Then click icon
5. Click icon, then select sketch (1), and click OK icon.
6. Click icon, then select the point method of to cerate two curves as shown in Figure 3.
7. Click icon, and edit as shown in Figure 4, then select the yellow face, then click the yellow curve, and click OK icon.
8. Click icon, and edit as shown in Figure 5, then select the yellow face, then click the yellow curve, and click OK icon.
http://www.cadfamily.com/HTML/Article/Shaft%20Modeling%20in%20UGS_NX_476.htm
1. Launch UG.
2. Click icon, select Model and input name “Shaft”.
3. Click icon, then click icon to create a sketch as shown in Figure1, then click icon.
4. Click icon, select sketch (1) to revolve, then select XC as the vector, then select the yellow point as the point and edit as shown in Figure 2. Then click icon
5. Click icon, then select sketch (1), and click OK icon.
6. Click icon, then select the point method of to cerate two curves as shown in Figure 3.
7. Click icon, and edit as shown in Figure 4, then select the yellow face, then click the yellow curve, and click OK icon.
8. Click icon, and edit as shown in Figure 5, then select the yellow face, then click the yellow curve, and click OK icon.
Coupling Shaft in PROE
http://www.cadfamily.com/HTML/Article/Coupling%20Shaft%20in%20PROE_478.htm
Step1. Create and name the model of part of INSTANCE_SHAFT2.PRT.
Step2. Create the basis feature of the part—the rotation features of the solid as shown in Figure 2, the relevant operations are as follows.
(1) Select the command of rotation feature: click and select the command.
(2) Select the type of rotation feature: click the icon of solid type.
(3) Define the placement property of sketch section of rotation.
1. Click sketch icon in the control panel, and then click icon.
2. Set sketch plane: select FRONT datum plane as the sketch plane.
3. Set view orientation of the sketch: use default direction of the yellow arrow as view orientation of the sketch.
4. Specify the reference of the sketch plane: select RIGHT datum plane as the reference of the sketch plane.
5. Specify the orientation of reference of the sketch plane: select RIGHT datum plane as the orientation of reference of the sketch plane.
6. Complete the placement property of sketch section: click the button in the window of the definition of the placement property of the sketch section.
(4) Create feature section: draw the feature section as shown in Figure 3 (Drawing centerline is necessary.) Complete it and click the icon .
Step1. Create and name the model of part of INSTANCE_SHAFT2.PRT.
Step2. Create the basis feature of the part—the rotation features of the solid as shown in Figure 2, the relevant operations are as follows.
(1) Select the command of rotation feature: click and select the command.
(2) Select the type of rotation feature: click the icon of solid type.
(3) Define the placement property of sketch section of rotation.
1. Click sketch icon in the control panel, and then click icon.
2. Set sketch plane: select FRONT datum plane as the sketch plane.
3. Set view orientation of the sketch: use default direction of the yellow arrow as view orientation of the sketch.
4. Specify the reference of the sketch plane: select RIGHT datum plane as the reference of the sketch plane.
5. Specify the orientation of reference of the sketch plane: select RIGHT datum plane as the orientation of reference of the sketch plane.
6. Complete the placement property of sketch section: click the button in the window of the definition of the placement property of the sketch section.
(4) Create feature section: draw the feature section as shown in Figure 3 (Drawing centerline is necessary.) Complete it and click the icon .
5/03/2011
Valve Clack in UG
http://www.cadfamily.com/HTML/Article/Valve%20Clack%20in%20UG_451.htm
1. Launch UG.
2. Click icon, select Model and input name “Valve Clack”.
3. Click icon, then select the ZC as the vector, and edit as shown in Figure 1, then click icon and edit as shown in Figure 2 to define the point, then click icon twice.
4. Click icon, and edit as shown in Figure 3, and click icon.
5. Click icon, and edit as shown in Figure 4, and click icon.
6. Click icon, and edit as shown in Figure 5, and click icon.
7. Click icon, select the red face as the planar placement face, and then edit as shown in Figure 6, then click icon.
1. Launch UG.
2. Click icon, select Model and input name “Valve Clack”.
3. Click icon, then select the ZC as the vector, and edit as shown in Figure 1, then click icon and edit as shown in Figure 2 to define the point, then click icon twice.
4. Click icon, and edit as shown in Figure 3, and click icon.
5. Click icon, and edit as shown in Figure 4, and click icon.
6. Click icon, and edit as shown in Figure 5, and click icon.
7. Click icon, select the red face as the planar placement face, and then edit as shown in Figure 6, then click icon.
Cover in PROE
http://www.cadfamily.com/HTML/Article/Cover%20in%20PROE_449.htm
Step1. Create and name the model of part as INSTANCE_PART_COVER.PRT.
Step2. Create the solid rotation feature shown as Figure 2, the relevant operations are shown as follows.
1 Click “insert”>“”.
2 Select the type of extrusion feature in the appeared control panel: click icon.
3 Define the placement property of sketch section.
(1) Click> icon in the control panel
(2) Set sketch plane: select datum plane FRONT as sketch plane.
(3) Set view orientation of sketch: take default orientation of the yellow arrow in the model as view orientation.
(4) Specify referential sketch plane: select datum plane TOP as reference.
(5) Specify the orientation of referential sketch plane: select Top as the orientation of referential sketch plane.
(6) Complete the placement property of sketch section: click button in the window of defining the placement property of sketch section.
4 Create feature section: accept the default reference selection, and then draw the section as Figure 3 shown(don’t forget to draw center line). Click button then quit sketch.
5 Define revolving angle: select the type of revolving angle in the control panel, , then enter 360 in the textbox of angel , and press the Enter key.
6 Preview feature: click icon in the control panel to browse the created feature.
7 Finish feature: click icon to finish the rotation.
Step3. Create the solid extrusion feature shown as Figure 4, the relevant operations are shown as follows.
Step1. Create and name the model of part as INSTANCE_PART_COVER.PRT.
Step2. Create the solid rotation feature shown as Figure 2, the relevant operations are shown as follows.
1 Click “insert”>“”.
2 Select the type of extrusion feature in the appeared control panel: click icon.
3 Define the placement property of sketch section.
(1) Click> icon in the control panel
(2) Set sketch plane: select datum plane FRONT as sketch plane.
(3) Set view orientation of sketch: take default orientation of the yellow arrow in the model as view orientation.
(4) Specify referential sketch plane: select datum plane TOP as reference.
(5) Specify the orientation of referential sketch plane: select Top as the orientation of referential sketch plane.
(6) Complete the placement property of sketch section: click button in the window of defining the placement property of sketch section.
4 Create feature section: accept the default reference selection, and then draw the section as Figure 3 shown(don’t forget to draw center line). Click button then quit sketch.
5 Define revolving angle: select the type of revolving angle in the control panel, , then enter 360 in the textbox of angel , and press the Enter key.
6 Preview feature: click icon in the control panel to browse the created feature.
7 Finish feature: click icon to finish the rotation.
Step3. Create the solid extrusion feature shown as Figure 4, the relevant operations are shown as follows.
Hair Drier in SolidWorks
http://www.cadfamily.com/HTML/Article/Hair%20Drier%20in%20SolidWorks_450.htm
Step1: Select the workbench
1.Launch solidworks2009
2.Select Start>new >a 3d representation.of a singe desinge compoent
3.Save file .Rename PartBody “Hair Drier”
Step2:draw the main body
1. Set the workbenth “front plant"
2. Reference the front plane,creat a sketch
3. Click.draw the sketch
4.Exit the sketch3. setting the path as centerline as shown in Figure 2 with icon, Centrepoint Arc icon, andicon. At last,quit the sketch
5.Revovle.The path: insert>face>revovle. As is shown in Figure 3 .Click the revovled icon.
6.Creat a new reference .Click the face1(shown in the Figure5) and next click.The path : insert>reference geometry>plane. All is shown in the Figure4.
7.Select the reference. Creat a new sketch.Click the sketch icon.And draw the sketch as shown in the Figuer6 with Center Rectangle icon, Sketch Fillet icon, Smart Dimension icon. At last quit the sketch workbench.
Step1: Select the workbench
1.Launch solidworks2009
2.Select Start>new >a 3d representation.of a singe desinge compoent
3.Save file .Rename PartBody “Hair Drier”
Step2:draw the main body
1. Set the workbenth “front plant"
2. Reference the front plane,creat a sketch
3. Click.draw the sketch
4.Exit the sketch3. setting the path as centerline as shown in Figure 2 with icon, Centrepoint Arc icon, andicon. At last,quit the sketch
5.Revovle.The path: insert>face>revovle. As is shown in Figure 3 .Click the revovled icon.
6.Creat a new reference .Click the face1(shown in the Figure5) and next click.The path : insert>reference geometry>plane. All is shown in the Figure4.
7.Select the reference. Creat a new sketch.Click the sketch icon.And draw the sketch as shown in the Figuer6 with Center Rectangle icon, Sketch Fillet icon, Smart Dimension icon. At last quit the sketch workbench.
Knob in UG
http://www.cadfamily.com/HTML/Article/Knob%20in%20UG_448.htm
1. Launch UG.
2. Click icon, select Model and input name “Knob”.
3. Click icon, then click icon to create a sketch as shown in Figure1, then click icon.
4. Click icon, then select the XC-ZC plane as the sketch plane as shown in Figure 2, and then click icon to create a sketch as shown in Figure 3, then click icon.
5. Click icon, then select the XC-ZC plane as the sketch plane as shown in Figure 2, and then click icon to create a sketch as shown in Figure 4, then click icon.
6. Click icon, then select the yellow curves as the first chain of curves and then press the mouse middle key in the blank areas, then select the green curves as the second chain of curves as shown in Figure 5, and then click icon.
1. Launch UG.
2. Click icon, select Model and input name “Knob”.
3. Click icon, then click icon to create a sketch as shown in Figure1, then click icon.
4. Click icon, then select the XC-ZC plane as the sketch plane as shown in Figure 2, and then click icon to create a sketch as shown in Figure 3, then click icon.
5. Click icon, then select the XC-ZC plane as the sketch plane as shown in Figure 2, and then click icon to create a sketch as shown in Figure 4, then click icon.
6. Click icon, then select the yellow curves as the first chain of curves and then press the mouse middle key in the blank areas, then select the green curves as the second chain of curves as shown in Figure 5, and then click icon.
Subscribe to:
Posts (Atom)