This chapter describes the design flow to develop a custom SOPC Builder
component. This chapter provides tutorial steps that guide you through
the process of creating a custom component, integrating it into a system,
and downloading it to hardware.
This chapter is divided into the following sections:
■ Component Development Flow (see page 6–3) .
■ Design Example: Pulse-Width Modulator (PWM) Slave (see page 6–8).
This design example demonstrates developing a component with a
single AvalonTM slave interface. In this section, you will start with a
ready-made HDL design, package it into a SOPC Builder
component, and then instantiate it in a system. If you have a
development board, you can download the design to hardware and
see the PWM work.
No comments:
Post a Comment