GE Fanuc Automation VersaMax Serial to Ethernet Adapter

http://www.cadfamily.com/downinfo/300498.html

The easiest way to configure the IC200SET001 VMSE is over Ethernet. The following steps need to be done, in the order listed, to configure the VMSE.Preliminary StepConnect the VSME to the Ethernet network.Default IP AddressThe VMSE is shipped with a default IP address of 0.0.0.0, which automatically enables the DHCP within the VMSE.NOTE: Using the ARP (Address Resolution Protocol) command (see below) you can always override the IP address given to the VMSE by your DHCP server.

Procedure: Assigning a New IP AddressUse the following steps to assign an IP address over the network. All of thefollowing are done from the MS-DOS prompt of your personal computer. The actual numbers and letters you must type are shown in bold type.

This data is not case-sensitive. You can access the MS-DOS prompt from your computer'sStart/Programs submenu.
For ease of reading on the printed page, many of the screen images shown in the figures in this manual have been converted from theirnormal white letters on a black background to black letters on a white background.In the example shown in this section, the IP Address 3.16.27.44 will be assigned to the VMSE.