Lantek-Punch module reference manual

http://www.cadfamily.com/downinfo/300772.html
1.2 Startup This option enables the configuration of parameters of the Initialization section of a machine.
For this: Prompt for this data when initializing The machine initialization process must be done always before making any machine instruction.
With this option enabled, the system will show the Startup dialog always when the initialization instruction is executed. Initializing the machine: In the nesting module it can be done manually using the option Machining->Initialize .
Execute every rapid with head up Before any rapid movement there will be one instruction for the machine to rise the cutting head if this parameter is enabled. This is used for safety, to prevent head damages.
Apply head up at the beginning of machining This option will appear only if Execute every rapid with head up is disabled. With this, the user configures the system for including one head up instruction always at the beginning of the machining process.