http://www.cadfamily.com/downinfo/300593.html
Known ProblemsThe OLGA Server does not always consistently handle the case of labels. To avoid problems, it is recommended that you always use upper case for all labels both within the extension and in the *.inp file.On occasion and with certain LAN networks, it has been observed that the first attempt to connect to the OLGA Server (either via the Connect button on the Server page of the Setup tab or via the Auto Start feature) may result in a refusal to connect.
Simply try again and the connection should be successful. This problem occurs when you typically start a new UniSim Design session.Whilst this is not a problem, it has been observed that simulating your integrated model across two computers with a LAN may lead to slower simulation run speeds.
In our testing a 2 computer model (one computer for UniSim Design and one for OLGA) obtained a simulation speed of 4 times real time. When the same model was run on a single computer, 24 times real time was achieved. This will be dependent on your network communication speed.
No comments:
Post a Comment