PowerPac -- AVR® IAR embedded Workbench® IDE Migration

http://www.cadfamily.com/a/EDA_PCB/ARM/PowerPac----AVR-IAR-em-x-bedded-Workbench-IDE-Migration-G_9983.html

Project file and project setup

The workspace and projects you have created with EWA90 are not compatibe with

EWAVR. If you are using the IAR Embedded Workbench IDE, follow these steps to

convert your project file manually:

1 Start your new version of the AVR IAR Embedded Workbench IDE and create a new

workspace by choosing File>New and then Workspace.

2 Choose Project>Create New Project to create a new project. To add your source code

files, choose Project>Add files. For detailed information about how to create

workspace and projects, see the tutorials available in the AVR IAR Embedded

Workbench User Guide.

PowerPac -- AVR® IAR C/C++ Compiler Reference Guide for Atme

http://www.cadfamily.com/a/EDA_PCB/ARM/PowerPac----AVR-IAR-C-C---Compiler-Reference-Guide-for-Atme_9982.html

This section contains examples and descriptions of the segments used for storing code,

in other words, functions, and the interrupt vector table. Typically, these segments are

placed in the code memory space (flash).

The -Z command is used for defining all segments in the following examples. The

addresses used in the examples are based on the assumed target system described in the

Table 10, Memory layout of a target system (example), on page 35. Note that because

the described target system is limited in size of code memory space, several segments

supported by the compiler are not applicable for this target system.

For a complete list of all segments, see Summary of segments, page 149.

PowerPac -- IAR Embedded Workbench IDE Advanced RISC Machine

http://www.cadfamily.com/a/EDA_PCB/ARM/PowerPac----IAR-Embedded-Workbench-IDE-Advanced-RISC-Machine_9981.html

PowerPac -- IAR Linker and Library Tools Reference Guide

http://www.cadfamily.com/a/EDA_PCB/ARM/PowerPac----IAR-Linker-and-Library-Tools-Reference-Guide_9984.html

PowerPac -- QuickStart Card Upgrading an IAR Powerpac Produc

http://www.cadfamily.com/a/EDA_PCB/ARM/PowerPac----QuickStart-Card-Upgrading-an-IAR-Powerpac-Produc_9985.html

Upgrading the license server

Product upgrades for network licenses might come with an

upgrade CD for the license server software. If that is the case,

perform the following steps on the same computer where you

have the current license server software installed.

Note: This will shut down the license server and make all

network licenses temporarily unavailable.

1 First uninstall the current version of the license server

software by selecting the appropriate Uninstall IAR

License Server item from the Start menu.

2 Insert the installation CD. The installation program

should start automatically. If it does not, run the

a u t o r u n . e x e program from the CD.

PowerPac -- QuickStart Card Installing IAR PowerPac™ using

http://www.cadfamily.com/a/EDA_PCB/ARM/PowerPac----QuickStart-Card-Installing-IAR-PowerPac-using_9987.html

The installation procedure

The installation of IAR PowerPac™ is a three-stage

procedure:

A First you install the IAR Systems software using a

QuickStart key, which allows you to use the product

for 30 days.

B During this 30-day period, you must activate your

license by registering the product with IAR Systems.

Within 5 business days, you will receive a permanent

key for your license.

C Finally you install the permanent key. This opens up the

product for permanent usage.

Follow the detailed steps below for each stage.

A. Installing the software

1 Remove any dongles.

2 Insert the installation CD. The installation program

should start automatically. If it does not, run the

autorun.exe program from the CD.

PowerPac -- QuickStart Card Installing IAR embedded Workb

http://www.cadfamily.com/a/EDA_PCB/ARM/PowerPac----QuickStart-Card-Installing-IAR-em-x-bedded-Workb_9988.html

The installation procedure

The IAR Embedded Workbench® installation is a three-stage

procedure:

A First you install the IAR Systems software using a

QuickStart key, which allows you to use the product

for 30 days.

B During this 30-day period, you must activate your

license by registering the product with IAR Systems.

Within 5 business days, you will receive a permanent

key for your license.

C Finally you install the permanent key. This opens up the

product for permanent usage.

Follow the detailed steps below for each stage.

A. Installing the software

1 Remove any dongles.

2 Insert the IAR Embedded Workbench installation CD.

The installation program should start automatically. If it

does not, run the autorun.exe program from the CD.

3 Select Install IAR Embedded Workbench®.

4 You must accept the license agreement when prompted.

By clicking the Accept button, you confirm that you

have read and understood the license agreement.