Step2. Create the solid rotation feature shown as Figure 2, the relevant operations are shown as follows.
1 Click “insert”>“
”.
”.
2 Select the type of extrusion feature in the appeared control panel: click
icon.
icon.
3 Define the placement property of sketch section.
(1) Click 
>
icon in the control panel
> icon in the control panel
(2) Set sketch plane: select datum plane RIGHT as sketch plane.
(3) Set view orientation of sketch: take default orientation of the yellow arrow in the model as view orientation.
(4) Specify referential sketch plane: select datum plane TOP as reference.
(5) Specify the orientation of referential sketch plane: select Top as the orientation of referential sketch plane.
(6) Complete the placement property of sketch section: click
button in the window of defining the placement property of sketch section.
button in the window of defining the placement property of sketch section.
4 Create feature section: draw the section as Figure 3 shown. Click 
button then quit sketch.
button then quit sketch.
5 Define revolving angle: select the type of revolving angle 
in the control panel, , then enter 360 in the textbox of angel , and press the Enter key.
in the control panel, , then enter 360 in the textbox of angel , and press the Enter key.
6 Preview feature: click 
icon in the control panel to browse the created feature.
icon in the control panel to browse the created feature.
7 Finish feature: click 
icon to finish the rotation.
icon to finish the rotation.
Get free full Tutorial!
Please send me email:
cadxneter@hotmail.com
No comments:
Post a Comment