http://www.cadfamily.com/downinfo/300553.html
The case study for this lesson is the Handle Block used in the Drill Press assembly shown below. The Handle Block is part of the Handle Mechanism sub-assembly. This case study focuses on creating features that incorporate the design intent of the part. The Handle Block will consist of shafts, grooves, multi-profiles, fillets, chamfers, and a shell feature.
The Handle Block must meet the following design intent requirements (continued):The model must be hollow and have a uniform thickness of 3mm, except the end, which must have a thickness of 1mm.• The Shell option will hollow out the model as required. The holes are normal to the sides of the handle block.• The holes must be created on the surface of the handle block. The holes will then be extruded normal to the handle block surface.
Lesson 2 introduced basic Sketcher tools and the Sketcher environment. This lesson will introduce advanced Sketcher tools.Sketcher includes the following additional tools:Axis creation toolRe-limitation toolsTransformation toolsProject 3D element toolsIn addition, you will, you will learn how to analyze a sketch using the Sketch Analysistool.
No comments:
Post a Comment