Design Fan with UG_NX

 

1. Launch UG.

2. Click icon, select Model and input name “Fan”.

3. Click icon, then select the ZC as the vector, and edit as shown in Figure 1, then click icon and edit as shown in Figure 2 to define the point, then click icon twice.

Figure 1 Figure 2

4. Click icon, select the center of yellow circle as the point and edit as shown in Figure 3. Then click icon

Figure 3

5. Click icon, select the icon in the Point Method, then click icon, and select the two points to create the curve as shown in Figure 4.

Figure 4

6. Click icon, select the green curve to project, then click icon to shade with edges, and then select the two yellow faces as shown in Figure 5

Figure 5

7. Click icon, then select the yellow parts as shown in Figure 6, then click icon

Figure 6

8. Click icon, then select the yellow curve as the section string 1, and select the red curve as the section string 2 as shown in Figure 7, then click icon

Figure 7

9. Click icon, then select the yellow face to thicken and edit as shown in Figure 8, then click icon

http://www.cadfamily.com/html/Article/Design%20Fan%20with%20UG_NX_588_1.htm