Axletree in UG_NX

Figure1(Final model)

Step1: Establish the Model file

1.Getting Start with UG NX 7.0 > Start UG NX7.0

2.Click New on the Standard toolbar (or choose File→New).

3.Click Model (the first item in the pop-up menu list)→Verify that Unit for this part are set to Millimeters.→Double-click in the Name field (under New File Name) to set it focused.→ Type your last name.

Step2:draw the main body

1.Click Sketch ,select the "XC-YC"plane

Figure2

2.Click Finish Sketch

3.Click Revolve

Figure3

4.Click Sketch

Figure4

Figure5

5.Click Finish Sketch

6.Click Extrude ,and hide the sketch

http://www.cadfamily.com/html/Article/Axletree%20in%20UG_NX_609_1.htm

http://www.cadfamily.com/html/Article/Axletree%20in%20UG_NX_609_2.htm