CADFamily.com: Blower with UG

6/30/2011

Figure1(Final model)

Step1:Establish a new model,named blower.prt

Step2:Create sketch 1 as shown in figure 1

(1)Click ,,Popping the dialog box of "create sketch"

(2)Choose XC-YC as sketch plane,click

(3)Create sketch as figure 2

(4)Click

figure 1 figure 2

Step3:Create mirror curve as shown in figure 3

(1) Click ，curve from curves, mirror curve,Popping the dialog box of "mirror curve" showed in figure 4

(2) Choose the curve in figure 1 as mirror curve ,choose ZC-XC as mirror plane.

(3) Click

figure 3 figure 4

Step4:Create sketch 2 as shown in figure 5

(1)Click ,,Popping the dialog box of "create sketch"

(2)Choose ZC-XC as sketch plane,click

(3)Create sketch as figure 6

figure 5 figure 6

(4)Click

Step5:Create datum plane 1 as shown in figure 7

(1)Click ,Popping the dialog box of "datum plane" showed in figure 8

figure 7 figure 8

(2)In the field "type",choose "at distance" ,choose YC-ZC as reference plane,at the blank of distance input 160.

(3)Click

Step6:Create sketch 3 as shown in figure 9

(1)Click ,,Popping the dialog box of "create sketch"

(2)Choose datum plane 1 as sketch plane,click

figure 9 figure 10

(3)Create sketch as figure 10(first,click ,curve from curves,intersection curve,respectively choose the two curves.

(4)Click

Step7:Create datum plane 2 as shown in figure 11

figure 11

(1) Click ,Popping the dialog box of "datum plane"

(2) In the field "type",choose "point and direction" ,choose the curve endpoint as specify point ,choose XC as specify vector .As showed in figure 12

figure 12

(3) Click

Step8:Create sketch 4 as shown in figure 13(Like step 6 and choose datum plane 2 as sketch plane,create sketch like figure 14)

CADFamily.com