Design Cellphone Cover with ProE Part-A

 

1.Launch PRO-E

2.Click icon, select part and input name “FRONT_COVER”.

3.Clickicon, select the sketch plane FRONT then select OK to create a sketch as shown in Figure 1 and figure 2 ,then click the

Figure 1

Figure 2

4.Select the sketch as shown in figure 2 then click icon and select extrude as solid then enter a depth of the extrude.the extrude1 as shown in Figure 3 and figure 4.

Figure 3

Figure 4

5.Clickicon, select the sketch plane surf F37 then select OK to create a sketch as shown in Figure 5 and figure 6 ,then click the

Figure 5

Figure 6

6.Select the sketch as shown in figure 6 then click icon and select extrude as solid then enter a depth of the extrude.the extrude1 as shown in Figure 7 and figure 8.

Figure 7

Figure 8

7.Click the icon to merge the quilt figure 4 and figure 8 ,this process as shown in figure 9 and figure 10 and figure 11

http://www.cadfamily.com/html/Article/Design%20Cellphone%20Cover%20with%20ProE%20Part-A_647_1.htm

http://www.cadfamily.com/html/Article/Design%20Cellphone%20Cover%20with%20ProE%20Part-A_647_2.htm

http://www.cadfamily.com/html/Article/Design%20Cellphone%20Cover%20with%20ProE%20Part-A_647_3.htm