VMEbus TCP/IP-VXIbus Interface Specification VXI-11.1

http://www.cadfamily.com/downinfo/302224.html

The routing of messages from the LAN to the appropriate VXIbus device takes place via the create_link RPC. This RPC is used to create a network instrument link. The created link is associated with a particular VXIbus device via the device parameter. This parameter is a character string which is parsed by the TCP/IP-VXIbus interface device to determine which VXIbus device the link is associated with.
RULE B.1.1:
A TCP/IP-VXIbus Interface Device SHALL support a device string of the following format:
[,]where:
- A name corresponding to the address of a single VXIbus interface. This name
SHALL uniquely identify the interface on the TCP/IP-VXIbus interface device.
- The logical address of a VXIbus device on the VXIbus interface. (optional)