IAR PowerPac USB Host User Guide

http://www.cadfamily.com/downinfo/302187.html
This chapter provides a step-by-step introduction to using IAR PowerPac USB Host.
Starting with an example project PowerPac includes an example workspace and projects for every supported CPU. We recommend to use these as a starting point for all your applications.
To get your new application running, you should proceed as follows:
1 Create a work directory for your application, for example c:\work
2 In the IAR Embedded Workbench IDE, select Example applications in the Startup dialog box.
3 If the Startup dialog box is closed, choose Help | Startup Screen to open it.
4 Select BoardSupport from the Example Applications list.
5 Select the project which is consistent to your hardware. Choose a destination folder for your project, for example c:\work. After generating the project of your choice, the screen should look for example like this: