http://www.cadfamily.com/downinfo/302188.html
With the ARM RDI 1.5.1 Driver for Signum Emulators installed, you are ready to
configure your Embedded Workbench
IAR Embedded Workbench IAR Embedded Workbench IAR Embedded Workbench IAR Embedded Workbench
To configure the IAR Embedded Workbench:
1. Choose Options from the Project menu. The Options for Target dialog box
appears. Select the C-SPY category. In the Setup tab, choose RDI as the driver, as
in Figure 4.
2. Select the RDI tab. In the Manufacturer RDI Driver edit box, navigate to the
SigJdsRDI.dll file in the C:\Signum\RDI151 directory, as in Figure 5.
No comments:
Post a Comment