http://www.cadfamily.com/downinfo/302167.html

http://www.cadfamily.com/downinfo/302167.html

The Configure panel context will change context with the selected project branch

• In the Configure Component : Stock , Add Model > Cylinder
• Height (Z) = 260
• Radius = 70 [Enter]
A model was added to the Tree under the Stock component

This axis displays the "driven point" (identified by the symbol) and the X, Y, Z
DrivenPoint axes. The Driven Point Zero axis represents where the driven point of the
"active" tool would be located, relative to the "active" stock, if all linear axes were
positioned at zero.
The origin of the NC program (Program Zero) is located on the bottom center of the stock.